How to effectively maintain and service the gluing machine?

2024-12-31 17:43

filter making machine gluing machineThe gluing machine, also known as the glue coating machine, glue spraying machine, etc., is an important equipment in the filter production line. It is an automated equipment dedicated to controlling the fluid and applying the fluid to the surface or inside of the product. It can realize three-dimensional and four-dimensional path glue dispensing, precise positioning and glue control to ensure no drawing, no glue leakage and no glue dripping. It can be used to inject glue before sealing the filter, as well as the glue injection process for the filter paper core cover, etc., to achieve precise positioning of the colloid, and supports dotting, line drawing, circle and arc drawing.

The quality of daily maintenance of the gluing machine directly affects its life. The following are the steps for daily maintenance of the gluing machine:

(1) Before changing the glue type, the pipeline needs to be cleaned. At this time, close the feed valve first, open the discharge valve, remove the remaining glue in the gluing machine barrel, close the discharge valve, open the feed valve to pour the cleaning solvent, activate the machine body and then press out the solvent and flush it according to the normal operation method.

(2) If the air pressure inlet is abnormal or water vapor is found, you can remove the water vapor in the pressure regulator filter or check if there is any abnormality in the air pressure source. Before using the glue in large quantities, the gluing machine should try a small amount first to avoid errors. , when the test is normal, mass production will be carried out, and the vacuum system will vacuum and remove bubbles from the glue to avoid bubbles during the mixing process. (You can also let it stand for about 20 minutes before trying it again so that the bubbles generated during mixing can be removed in time.)

(3) Clean the machine part regularly as much as possible to extend the service life of the equipment. The more glue mixed together, the faster it reacts and the faster it cures. Reasonable glue allocation should be made according to the actual production situation to avoid glue waste, avoid accidents, and improve production efficiency.

(4) The power supply should be unplugged when the machine is not used for a long time. This will not only extend the life of the machine but also save a lot of electricity bills. Clean the gluing machine after each use and wipe it with alcohol. Use engine oil or butter on the parts of the gluing machine that are frequently moved to keep them lubricated. If the gluing machine is not used for a long time, the glue must be used up, otherwise the glue will solidify and it will be very troublesome to clean it.

filter making machine gluing machine filter making machine gluing machine

name:
Message:
Verification code:
submit
Comment